Configuration procedure – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 208
196
Figure 98 Network diagram
Configuration procedure
1.
Configure the AE:
{
Configure the IP addresses of AP 1, AP 2, and AP 3 on the AE, or select broadcast for the AE
to discover APs.
{
Perform configuration related to wireless location on the AE.
2.
Configure AP 1 to operate in monitor mode:
On the AC, configure AP 1, AP 2, and AP 3 to operate in monitor mode. AP 1, AP 2, and AP 3
are configured similarly, and this section only describes how to configure AP 1 for illustration.
# Create AP 1.
[AC] wlan ap ap1 model WA2220-AG
# Specify the serial ID for the AP.
[AC-wlan-ap-ap1] serial-id 210235A29G007C000020
# Configure the AP to operate in monitor mode.
[AC-wlan-ap-ap1] work-mode monitor
# Enable the radio.
[AC-wlan-ap-ap1] radio 1
[AC-wlan-ap-ap1-radio-1] radio enable
[AC-wlan-ap-ap1-radio-1] return
# Enable wireless location.
[AC] wlan rfid-tracking enable
# Configure the wireless location mode.
[AC] wlan ap ap1
[AC-wlan-ap-ap1] radio 1
[AC-wlan-ap-ap1-radio-1] rfid-tracking mode all
[AC-wlan-ap-ap1-radio-1] return
3.
Verify the configuration:
# Display wireless location radio information.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points