Configuring software automatic update, Configuring a wlan service template – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 25
13
Some ACs and fit APs have fixed country codes, whichever is used is determined as follows:
•
An AC's fixed country code cannot be changed, and all managed fit APs whose country codes are
not fixed must use the AC's fixed country code.
•
A fit AP's fixed country code cannot be changed and the fit AP can only use the country code.
•
If an AC and a managed fit AP use different fixed country codes, the fit AP uses its own fixed country
code.
To specify the country code:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Specify the global country
code.
wlan country-code code
By default, the country code is CN.
3.
Specify the AP name and its
model number and enter AP
template view.
wlan ap ap-name model
model-name [ id ap-id ]
The model name is needed only
when you create a new AP
template.
4.
Specify a country code for the
AP.
country-code code
Optional.
By default, the AP has no country
code and uses the global country
code. If an AP is configured with a
country code, the AP uses its own
country code.
NOTE:
If an AP is configured with a country code or has a fixed country code, changing the global country code
does not affect the country code of the AP.
Configuring software automatic update
A fit AP is a zero-configuration device. It can automatically discover an AC after power-on. To make sure
a fit AP can associate with an AC, their software versions must be consistent by default, which
complicates maintenance. This task allows you to designate the software version of an AP on the AC, so
that they can associate with each other even if their software versions are inconsistent.
To configure software version automatic update:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Configure software version
automatic update.
wlan apdb model-name
hardware-version software-version
Optional.
By default, the software versions of
the fit AP and the AC should be
consistent.
Configuring a WLAN service template
A WLAN service template includes attributes such as SSID, WLAN-ESS interface binding, authentication
method (open-system or shared key) information. A service template can be of clear or crypto type.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points