H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 80)

68
b. Click Add on the page to enter the following configuration page.
c. Set the service name as mac, and keep the default values for other parameters.
Figure 35 Adding service
# Add an account.
a. Click the User tab, and then select User > All Access Users from the navigation tree to enter the
user page.
b. Click Add on the page to enter the page as shown in Figure 36 .
c. Enter username 00146c8a43ff.
d. Set the account name and password both as 00146c8a43ff.
e. Select the service mac.
Figure 36 Adding account
4. Verify the configuration:
{
After the client passes the MAC authentication, the client can associate with the AP and access
the WLAN.
{
You can use the display wlan client verbose command, display connection command, and
display mac-authentication command to view the online clients.