Configuration guidelines – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 209
197
WLAN RFID Tracking
--------------------------------------------------------------------------------
AP Radio Mode
--------------------------------------------------------------------------------
ap1 1 MU/Tag
ap1 2 N/A
--------------------------------------------------------------------------------
# You can view the location information of the rogue AP, APs, and clients by maps, forms or
reports provided by the graphics software.
Configuration guidelines
•
To implement wireless location, configure at least three APs to operate in monitor or hybrid mode.
•
An AP monitors clients on different channels periodically. If the Tag message sending interval is
configured as 1 second, the AP scans and reports Tag messages every half a minute. If higher
location efficiency is required, you can set the Tag sending interval to the smallest value, 124
milliseconds on the AE.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points