Optimizing an 802.11n wlan, Network requirements – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 220
208
Figure 101 Configuring the multicast rate
5.
Disable buffering of multicast and broadcast packets:
[AC] undo wlan option broadcast-buffer enable
Optimizing an 802.11n WLAN
Network requirements
As shown in
, all the clients and APs get their IP addresses from the DHCP server. Client 1 using
802.11n associates with AP 1, and Client 2 using 802.11g associates with AP 2.
Enable 802.11n packet suppression and enable traffic shaping based on link status so that Client 1 does
not affect Client 2.
Figure 102 Network diagram
L2 Switch
AC
10.10.1.1/24
DHCP server
10.10.1.2/24
AP 1
AP 2
Client 2
Client 1
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points