H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 86
74
e.
Select the service dot1x.
Figure 43 Adding account
4.
Configure the wireless card:
a.
Double click the
icon at the bottom right corner of your desktop.
The Wireless Network Connection Status window appears.
b.
Click the Properties button in the General tab.
The Wireless Network Connection Properties window appears.
c.
On the Wireless Networks tab, select wireless network with the SSID dot1x, and then click
Properties.
The dot1x Properties window appears.
d.
On the Authentication tab, select Protected EAP (PEAP) from the EAP type list, and click
Properties.
e.
On the popup window, clear Validate server certificate, and click Configure.
f.
In the popup dialog box, clear Automatically use my Windows logon name and password
(and domain if any).
The configuration procedure is as shown in
through
.
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points