H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 83
71
Figure 38 Adding access device
# Add service.
a.
Click the Service tab, and then select Access Service > Service Configuration from the
navigation tree to enter the add service page.
b.
Click Add on the page to enter the configuration page shown in
.
c.
Set the service name to dot1x.
d.
Select EAP-PEAP AuthN from the Certificate Type drop-down list, and MS-CHAPV2 AuthN from
the Certificate Sub-Type list.
Figure 39 Adding service
# Add account.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C WX3000 Series Unified Switches H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points