H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 73)

61
2. Enable port security.
Configuring PSK authentication
Step Command Remarks
1. Enter system view.. system-view N/A
2. Enter WLAN-ESS interface
view. interface wlan-ess
interface-number
N/A
3. Enable 802.11 key
negotiation.
port-security tx-key-type 11key Not enabled by default.
4. Configure the pre-shared key.
port-security preshared-key
{ pass-phrase | raw-key } [ cipher
| simple ] key
Not configured by default.
5. Enable the PSK port security
mode.
port-security port-mode psk N/A
Configuring 802.1X authentication
Step Command
1. Enter system view. system-view
2. Enter WLAN-ESS interface view. interface wlan-ess interface-number
3. Enable the 802.1X port security mode.
port-security port-mode { userlogin-secure |
userlogin-secure-ext }
Configuring MAC authentication
Step Command
1. Enter system view. system-view
2. Enter WLAN-ESS interface view. interface wlan-ess interface-number
3. Enable MAC port security mode. port-security port-mode mac-authentication
NOTE:
802.11i does not support MAC authentication.
Configuring PSK and MAC authentication
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter WLAN-ESS interface
view.
interface wlan-ess
interface-number
N/A
3. Enable 802.11 key
negotiation.
port-security tx-key-type 11key Not enabled by default.
4. Enable the PSK and MAC port
security mode. port-security port-mode
mac-and-psk
N/A