H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 105)

93
# Bind service template 1 to radio 1.
[AC-wlan-ap-ap1-radio-1] service-template 1
[AC-wlan-ap-ap1-radio-1] radio enable
[AC-wlan-ap-ap1-radio-1] quit
[AC-wlan-ap-ap1] quit
# Configure AP 2: Create an AP template named ap2 and its model is WA2100, and configure the
serial ID of AP 2 as 2210235A22W0076000103.
[AC] wlan ap ap2 model WA2100
[AC-wlan-ap-ap2] serial-id 210235A22W0076000103
[AC-wlan-ap-ap2] radio 1 type dot11g
# Bind service template 1 to radio 1 of AP 2 (Intra-AC roaming requires consistent SSIDs of
different APs. Therefore, radio 1 of AP 2 should be bound to service template 1.).
[AC-wlan-ap-ap2-radio-1] service-template 1
[AC-wlan-ap-ap2-radio-1] radio enable
[AC-wlan-ap-ap2-radio-1] return
2. Verify the configuration:
After the client roams to AP2, use the display wlan client verbose command to display detailed
client information. You should find that the AP name and BSSID fields have been changed to those
of AP2. You can also use the display wlan client roam-track mac-address command to view client
roaming track information.
Inter-AC roaming configuration example
Network requirements
As shown in Figure 57 , a client associates with AP 1. Configure inter-AC roaming so that the client can
associate with AP2 when roaming to it.