H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 144)

132
[AC] interface wlan-ess 1
[AC-WLAN-ESS1] quit
# Create service template 1 of clear type, configure its SSID as session-balance, and bind
WLAN-ESS1 to the service template.
[AC] wlan service-template 1 clear
[AC-wlan-st-1] ssid session-balance
[AC-wlan-st-1] bind wlan-ess 1
[AC-wlan-st-1] authentication-method open-system
[AC-wlan-st-1] service-template enable
[AC-wlan-st-1] quit
# Create an AP template named ap1, and specify its model as WA2100, and serial ID as
210235A29G007C000020.
[AC] wlan ap ap1 model WA2100
[AC-wlan-ap-ap1] serial-id 210235A29G007C000020
[AC-wlan-ap-ap1] radio 1 type dot11g
# Bind service template 1 to radio 1 of AP 1.
[AC-wlan-ap-ap1-radio-1] service-template 1
[AC-wlan-ap-ap1-radio-1] radio enable
[AC-wlan-ap-ap1-radio-1] return
# Create an AP template named ap2 and specify its model as WA2100, and configure the serial
ID as 210235A29G007C000021.
system-view
[AC] wlan ap ap2 model WA2100
[AC-wlan-ap-ap2] serial-id 210235A29G007C000021
[AC-wlan-ap-ap2] radio 1 type dot11g
# Bind service template 1 to radio 1 of AP 2.
[AC-wlan-ap-ap2-radio-1] service-template 1
[AC-wlan-ap-ap2-radio-1] radio enable
[AC-wlan-ap-ap2-radio-1] return
# Create an AP template named ap3, and specify its model as WA2100, and serial ID as
210235A29G007C000022.
system-view
[AC] wlan ap ap3 model WA2100
[AC-wlan-ap-ap3] serial-id 210235A29G007C000022
[AC-wlan-ap-ap3] radio 1 type dot11g
# Bind service template 1 to radio 1 of AP 3.
[AC-wlan-ap-ap3-radio-1] service-template 1
[AC-wlan-ap-ap3-radio-1] radio enable
[AC-wlan-ap-ap3-radio-1] quit
[AC-wlan-ap-ap3] quit
2. Configure the load balancing mode:
# Enable session-mode load balancing, and configure the maximum number of sessions and the
maximum load gap as 5 and 4 respectively.
[AC] wlan rrm
[AC-wlan-rrm] load-balance session 5 gap 4
[AC-wlan-rrm] quit