beautypg.com

H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 34

background image

22

Step Command

Remarks

5.

Configure a channel.

Specify a channel number for the
radio:

channel channel-number

Set the channel mode to auto. In

this mode, you can lock the current

channel:

{

channel auto

{

channel lock

Optional.
By default:

auto mode is enabled.

No channel is locked.

For more information about the
commands, see WLAN

Command Reference.

6.

Configure the radio power.

Specify the maximum radio

power:
max-power radio-power

Lock the current power, and set the

maximum power as the power
after power selection:

power lock

Optional.
By default:

The maximum radio power

varies with country codes,

channels, AP models, radio
types and antenna types. If

802.11n is adopted, the

maximum radio power also
depends on the bandwidth

mode.

The current power is not
locked.

For more information about the
commands, see WLAN

Command Reference.

7.

Specify the type of
preamble.

preamble { long | short }

Optional.
By default, the short preamble is
supported.

8.

Enable Adaptive Noise
Immunity (ANI) function.

ani enable

Optional.
By default, ANI is enabled.

9.

Apply a radio policy to the
radio.

radio-policy radio-policy-name

Optional.
By default, the default_rp radio
policy is bound to a radio.
The radio policy must have been

configured with the wlan
radio-policy command.

10.

Configure the antenna type. antenna type type

Optional.
The default setting for the
command depends on the device

model.

11.

Configure the maximum
distance that the radio can

cover.

distance distance

Optional.
By default, the radio can cover 1
km (0.62 miles) at most.

12.

Enable the radio.

radio enable

By default, the radio is not
enabled.