H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 84)

72
a. Click the User tab, and then select Users > All Access Users from the navigation tree to enter the
user page.
b. Click Add on the page to enter the page shown in Figure 40 .
c. Enter a username user.
d. Add an account user and password dot1x.
e. Select the previously configured service dot1x.
Figure 40 Adding account
3. Configure the RADIUS server (IMCv5):
NOTE:
The following takes the IMC (the IMC versions are IMC PLAT 5.0 and IMC UAM 5.0) as an example to
illustrate the basic configurations of the RADIUS server.
# Add an access device.
a. Log in to the IMC Platform.
b. Click the Service tab, and then select User Access Manager > Access Device Management from
the navigation tree to enter the access device configuration page.
c. Click Add on the page to enter the configuration page as shown in Figure 41 :
d. Input 12345678 as the Shared Key. Keep the default values for other parameters.
e. Select or manually add the access device with the IP address 10.18.1.1.