H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 148)

136
[AC-WLAN-ESS1] quit
# Create service template 1 of clear type, configure its SSID as band-navigation, and bind the
WLAN-ESS interface with the service template.
[AC] wlan service-template 1 clear
[AC-wlan-st-1] ssid band-navigation
[AC-wlan-st-1] bind wlan-ess 1
# Disable fast association (Optional. By default, fast association is disabled.)
[AC-wlan-st-1] undo fast-association enable
[AC-wlan-st-1] service-template enable
[AC-wlan-st-1] quit
# Create an AP template named ap1, and specify its model as WA2620E-AGN, and serial ID as
260235A29G007C000020.
[AC] wlan ap ap1 model WA2620E-AGN
[AC-wlan-ap-ap1] serial-id 210235A29G007C000020
# Enable band navigation for AP 1 (Optional. By default, band navigation is enabled.).
[AC-wlan-ap-ap1] band-navigation enable
# Bind service template 1 to radio 1 of AP 1.
[AC-wlan-ap-ap1] radio 1 type dot11an
[AC-wlan-ap-ap1-radio-1] service-template 1
[AC-wlan-ap-ap1-radio-1] radio enable
[AC-wlan-ap-ap1-radio-1] quit
# Bind service template 1 to radio 2 of AP 1.
[AC-wlan-ap-ap1] radio 2 type dot11gn
[AC-wlan-ap-ap1-radio-2] service-template 1
[AC-wlan-ap-ap1-radio-2] radio enable
[AC-wlan-ap-ap1-radio-2] return
# Configure the band navigation load balancing session threshold as 2, and session gap as 1.
system-view
[AC] wlan rrm
[AC-wlan-rrm] band-navigation balance session 2 gap 1
Verifying the configuration
Client 1 and Client 2 are associated to the 5 GHz radio of AP 1, and Client 4 can only be associated to
the 2.4 GHz radio of AP 1. Because the number of clients on the 5 GHz radio has reached the upper limit
2, and the gap between the number of clients on the 5 GHz radio and 2.4 GHz radio has reached the
session gap 1, Client 3 is associated to the 2.4 GHz radio of AP 1.