Teac GigaStudio 3 - Manual (Page 246)

246 247
Feedback:
Without any feedback, we would only have a single echo. The feedback takes the out-
put of the delay and feeds it back into the input. This will repeat the echo sound over
and over again and each echo will become quieter each time it plays back until the
sound decays.
Damping:
This control has the efect of running the delayed signal through an EQ so that its signal
is band limited each time it is cycled. This delayed signal will become more dull with
each repeat. The effect is slight to extreme, depending on the setting.
Pan:
This sets the stereo pan of the currently selected tap echo. Using all 4 multi-taps, you
can have custom pan settings for each of the repeating multi-tap echoes.
Volume:
This sets the volume of the initial delay echo.
Speed:
Modulation (variation) rate of the delay time over a specified range. Set the rate of how
fast the variations occur.
Depth:
Modulation (variation) intensity of the delay time over a specified range. Set the spread
between the minimum and maximum delay times.