Teac GigaStudio 3 - Manual (Page 181)

180 181
Note regions and split can be selected using MIDI input, either from a virtual key-
board in GigaStudio, a sequencer, or a controller keyboard connected to the Giga com-
puter.
Click the MIDI Select botton to enable this mode.
For more specific and detailed information on regions, splits, dimensions, and edit
parameters, see the GigaStudio 3.0 Instrument Editor reference and tutorials.
See the QuickEdit tutorial for a walk-through on editing an instrument using the
QuickEdit tool.
Edits performed in QuickEdit applied to an instrument’s regions can be made on
an individual region-by-region basis. This preference must be set prior to performing
an edit. To do this click the Keyboard select option and choose either All regions or Indi-
vidual regions.
All regions = an instrument’s complete note range.
Individual regions = a single note selection.
Edits performed in QuickEdit applied to an instrument’s dimension splits can be
made on an individual region-by-region basis. To do this click the Dimension select op-
tion and choose either All splits or Individual splits.