Release trigger with tracking – Teac GigaStudio 3 User Manual
Page 131
130
131
For example, here we have the Mod-Wheel triggering a small scale when pushed for-
ward. (C-D-E-F-G)
Use the [Remove] button to delete any item in the list.
Release Trigger with Tracking
This is a simple looking tool that does some very fancy work.
•When using Release Trigger dimensions, this tool tracks the volume of the
samples as they play.
•When the note is released, the release trigger plays back at an appropriate
volume based on how loud the sample was when it was released.
•It can track the voice parameters such as the ADSR envelopes and base the
release trigger playback volume based on the position of the envelope.
•It can also track both the parameters and the signal level.
This tool was created to deal with some of the sample libraries that rely on the real
hall ambience of the room they were recorded in for a lush and authentic reverb tail.
By putting the release of the recordings on the release trigger, the results are stun-
ning. However, there is a problem with this method. Sometimes the samples are ex-
pressive and use diminuendos & crescendos or simply fade out. The problem comes in
when you try to release the hall ambience when the sample has died out or is at a low
point in its volume. This tool solves that problem by constantly tracking the signal level
of each samples and setting the volume of the release trigger samples accordingly.
Check one of the options and click [OK] to enable this tool: