Effect & dry levels – Teac GigaStudio 3 User Manual

Page 223

222

223

You can mute the individual Left-Right input level by clicking on the

[L] or [R] buttons. They will turn dark green to indicate that they are

turned off.

If you set the input level too high, the [Clip] light will light up. If that

happens, try a lower input setting.

Effect & Dry Levels:

You can adjust the individual levels of the Effected and the Dry signal or mute them

here.

Here the levels are un-muted. Use the faders to adjust the

individual levels.

Here the levels are muted by clicking on the [L] & [R] buttons.

No signal will be audible. You can also mute either level by

itself or even the individual left or right channels. This is

handy for daisy chaining two instances of a plug-in together

in various combinations.