Delta Electronics Network Device DOP-A/AE/AS - Manual (Page 82)

Delta DOP Series HMI Connection Manual|DOP-A/AE/AS Series
Revision January, 2008, Doc. Name: 2007PDD23000007 1-81
Mitsubishi Q Series CPU Port Back to Table
A. HMI factory settings
Baud rate: 19200, 8, ODD, 1.
Controller Station number: 0. (no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC)
communication is allowed.)
Control area/status area: D-0 / D-10.
NOTE
1) Please notice that no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC) communication
is allowed.
2) If communication baud rate is not correct, HMI will set PLC baud rate as HMI baud rate automatically.
Therefore, do not worry if the baud rate is set incorrectly.
3) This driver support Mitsubishi Q00 and Q00J series with password protection models.
B. Definition of controller Read/Write address
Registers
Read/Write Range
Register Type Format
Word No. Bit No.
Data length
Input X-n n: 0 ~ 1FFF N/A Word (multiple of 16)
Output Y-n n: 0 ~ 1FFF N/A Word (multiple of 16)
Direct Input DX-n n: 0 ~ 1FFF N/A Word (multiple of 16)
Direct Output DY-n n: 0 ~ 15 N/A Word (multiple of 16)
Latch Relay L-n n: 0 ~ 8191 N/A Word (multiple of 16)
Annunciator F-n n: 0 ~ 2047 N/A Word (multiple of 16)
Edge Relay V-n n: 0 ~ 2047 N/A Word (multiple of 16)
Step Relay S-n n: 0 ~ 8191 N/A Word (multiple of 16)
Link Relay B-n n: 0 ~ 1FFF N/A Word (multiple of 16)
Special Link Relay SB-n n: 0 ~ 7FF N/A Word (multiple of 16)
Internal Relay M-n n: 0 ~ 8191 N/A Word (multiple of 16)
Special Internal Relay SM-n n: 0 ~ 2047 N/A Word (multiple of 16)
Timer Value TN-n n: 0 ~ 2047 N/A Word
Retentive Timer Value SN-n n: 0 ~ 2047 N/A Word
Counter Value CN-n n: 0 ~ 1023 N/A Word
Data Register D-n n: 0 ~ 12287 N/A Word
Special Data Register SD-n n: 0 ~ 2047 N/A Word
Index Register Z-n n: 0 ~ 15 N/A Word
File Register R-n n: 0 ~ 32767 N/A Word