Delta Electronics Network Device DOP-A/AE/AS - Manual (Page 121)

Delta DOP Series HMI Connection Manual|DOP-A/AE/AS Series
1-120 Revision January, 2008, Doc. Name: 2007PDD23000007
Siemens S7 200 PLC Back to Table
A. HMI factory settings
Baud rate: 9600, 8, EVEN, 1.
Controller station number: 2.
Control area/status area: VW0 / VW10.
B. Definition of controller Read/Write address
Register
Read/Write Range
Register Type Format
Word No. Bit No.
Timer Tn n: 0 ~ 255 N/A
Analog Input Word AIWn n: 0 ~ 30 N/A
Counter Cn n: 0 ~ 255 N/A
Analog Output Word AQWn n: 0 ~ 30 N/A
Input Image IWn n: 0 ~ 14 N/A
Input Image IDn n: 0 ~ 12 N/A
Output Image QWn n: 0 ~ 14 N/A
Output Image QDn n: 0 ~ 12 N/A
Special Bits SMWn n: 0 ~ 199 N/A
Special Bits SMDn n: 0 ~ 197 N/A
Internal Bits MWn n: 0 ~ 98 N/A
Internal Bits MDn n: 0 ~ 96 N/A
Data Area VWn n: 0 ~ 9998 N/A
(DBWn) (n: 0 ~ 9998)
Data Area VDn n: 0 ~ 9996 N/A
Special S SWn n: 0 ~ 99 N/A
Special S SDn n: 0 ~ 97 N/A
Contacts
Read/Write Range
Contact type Format
Word No. Bit No.
Timer Bit Tn N/A n: 0 ~ 255
Counter Bit Cn N/A n: 0 ~ 255
Input Image In.b n: 0 ~ 15 b: 0 ~ 7
Output Image Qn.b n: 0 ~ 15 b: 0 ~ 7
Special Bit SMn.b n: 0 ~ 200 b: 0 ~ 7
Internal Bit Mn.b n: 0 ~ 99 b: 0 ~ 7
Data Area Bit Vn.b n: 0 ~ 9999 b: 0 ~ 7