Delta Electronics Network Device DOP-A/AE/AS - Manual (Page 60)

Delta DOP Series HMI Connection Manual|DOP-A/AE/AS Series
Revision January, 2008, Doc. Name: 2007PDD23000007 1-59
LG Glofa GM6 CNET Back to Table
A. HMI factory settings
Baud rate: 19200, 8, None, 1. (RS-232)
Controller station number: 0.
Control area/status area: %MW0 / %MW10.
NOTE
1) HMI default setting is predefined for CPU Port. If the user want to connect to CNET communication
module, the baud rate should be changed to 38400, 8, None, 1. (RS-422 / RS-485).
B. Definition of controller Read/Write address
Registers
Register Type Format Word No. Bit No. Data Size
Input Image IWb.s.w
w(word):0 ~ 3
s(slot): 0 ~ 7
b(base): 0 ~ 1 Word
Input Image IDb.s.w
w(word):0 ~ 1
s(slot): 0 ~ 7
b(base): 0 ~ 1 DWord
Output Image QWb.s.w
w(word):0 ~ 3
s(slot): 0 ~ 7
b(base): 0 ~ 1 Word
Output Image QDb.s.w
w(word):0 ~ 1
s(slot): 0 ~ 7
b(base): 0 ~ 1 DWord
Internal Memory MWn n: 0 ~ 4095 N/A Word
Internal Memory MDn n: 0 ~ 2047 N/A DWord
Contacts
Contact type Format Word No. Bit No.
Input Image IXb.s.n s(slot): 0 ~ 7
n(bit): 0 ~ 63
b(base): 0 ~ 1
Output Image QXb.s.n s(slot): 0 ~ 7
n(bit): 0 ~ 63
b(base): 0 ~ 1
Internal Memory MXn N/A n: 0 ~ 65535