Delta Electronics Network Device DOP-A/AE/AS - Manual (Page 75)

Delta DOP Series HMI Connection Manual|DOP-A/AE/AS Series
1-74 Revision January, 2008, Doc. Name: 2007PDD23000007
Mitsubishi FX3U PLC Back to Table
A. HMI factory settings
Baud rate: 9600, 7, EVEN, 1.
Controller Station number: 0. (no PLC station number in protocol, therefore, only 1(HMI) to 1 (PLC)
communication is allowed.)
Control area/status area: D0 / D10.
B. Definition of controller Read/Write address
Registers
Read/Write Range
Register Type Format
Word No. Bit No.
Data length
Auxiliary Relay Mn n: 0 ~ 7679 N/A Word
Special Auxiliary Relay Mn n: 8000 ~ 8511 N/A Word
Status Relay Sn n: 0 ~ 4095 N/A Word
Input Relay Xn n: 0 ~ 377(octal) N/A Word
Output Relay Yn n: 0 ~ 377(octal) N/A Word
Timer PV Tn n: 0 ~ 255 N/A Word
16-bit Counter PV Cn n: 0 ~ 199 N/A Word
32-bit Counter PV Cn n: 200 ~ 255 N/A Double Word
Data Register Dn n: 0 ~ 7999 N/A Word
Special Data Register Dn n: 8000 ~ 8511 N/A Word
¾ Auxiliary Relay/ Special Auxiliary Relay/ Status Relay/ Input Relay /Output Relay: Address must be the
multiple of 16.
Contacts
Read/Write Range
Contact type Format
Word No. Bit No.
Auxiliary Relay Mn N/A n: 0 ~ 7679
Special Auxiliary Relay Mn N/A n: 8000 ~ 8511
Status Relay Sn N/A n: 0 ~ 4095
Input Relay Xn N/A n: 0 ~ 377(octal)
Output Relay Yn N/A n: 0 ~ 377(octal)
Timer Flag Tn N/A n: 0 ~ 255
Counter Flag Cn N/A n: 0 ~ 255