Comtech EF Data CDM-710G - Manual (Page 82)

CDM-710G High-Speed Satellite Modem Revision 1
Front Panel Operation MN-CDM710G
6–6
6.2 Opening Screen
The opening ‘welcome screen’ shown here is
representative of what displays whenever power is
first applied to the unit (the Firmware Version
may differ). Pressing any key takes the user to the
top-level Select menu.
IMPORTANT
For purposes of this documentation, a CDM-710GL (L-Band) unit is shown; the
unit in use could be either a CDM-710G or CDM-710GL High-Speed Satellite
Modem.
6.3 SELECT: (Main) Menu
SELECT: Config Monitor
Test Info Save/Load Util
Move the cursor to the desired choice using the W X arrow keys, then press
ENTER
. The
following table describes the function of each menu branch (along with the section in this chapter
that provides information on that branch and its accompanying submenus):
SELECTION MENU BRANCH DESCRIPTION
Config
(Configuration) Provides the user selections for the desired Interface, Transmit, and
Receive operations
Monitor
Permits the user to monitor the alarm status of the unit, to view the log of stored events,
and to display the Receive Parameters screen.
Test
Permits the user to configure the modem into one of several Test modes; e.g., CW and
Loopback
Info
(Information) Provides a summary/display of the Interface, Transmit, Receive, and M&C
configurations.
Save/Load Permits the user to save and retrieve up to 10 different modem configurations.
Util
(Utility) Permits the user to perform miscellaneous functions, such as setting the Real-
Time Clock, adjusting the display brightness, etc.