Comtech EF Data CDM-710G - Manual (Page 211)

CDM-710G High-Speed Satellite Modem Revision 1
Remote Control MN-CDM710G
A–21
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
IP Address IPA= 18 bytes Command or Query.
Used to set the IP address and network prefix for the
10/100 BaseTx Ethernet management port, in the format:
xxx.xxx.xxx.xxx.yy, where:
xxx.xxx.xxx.xxx is the IP address, and
yy is the network prefix (00..31)
Example: IPA=010.006.030.001.24
IPA=
IPA?
IPA*
IPA#
IPA? IPA= xxx.xxx.xxx.xxx.yy
Gateway
Address IPG= 15 bytes Command or Query.
Used to set the Gateway IP addess for the
10/100 Base Tx Ethernet management port, in the format:
xxx.xxx.xxx.xxx, where:
xxx.xxx.xxx.xxx is the IP address
Example: IPG = 010.006.030.001
IPG=
IPG?
IPG*
IPG# IPG? IPG = xxx.xxx.xxx.xxx
Interface Type N/A 2 bytes Query Only.
Interface Type, where:
s=Defines which interface slot (1 or 2)
x=Defines the interface type, where:
0=Reserved
1=Reserved
2=Gigabit Ethernet
3=HSSI
4=E3T3STS1
Example: ITF?1
ITF?
ITF*
ITF# ITF?s ITF=sx
Rx Link Margin N/A 4 bytes Query only.
Unit returns the value of the Link Margin.
Returns 00.0 if demod is unlocked.
Example: LNK=12.3
LNK?
LNK*
LNK# LNK? LNK=xxxx
Local/Remote
Status LRS= 1 byte Command or Query.
Local/Remote status, where:
0=Local
1=Serial
2=Reserved
3=Ethernet
Example: LRS=1 (which is remote Serial)
LRS=
LRS?
LRS*
LRS# LRS? LRS=x
Unit MAC
Address N/A 12 bytes Query Only.
MAC address of the unit, reported in hexadecimal.
Example: MAC=0006B000D2A7
(The MAC address of the unit is 00:06:B0:00:D2:A7 )
MAC?
MAC*
MAC# MAC? MAC=AABBCCDDEEFF