Comtech EF Data CDM-710G - Manual (Page 232)

CDM-710G High-Speed Satellite Modem Revision 1
Remote Control MN-CDM710G
A–42
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Rx Signal Level N/A 3 bytes Query Only.
Unit returns the value of the Rx signal level, in dBm, between +3.0 and –
99.0 dBm, where;
xxx is the Rx signal level.
Examples:
RSL=+03
RSL=-41
RSL?
RSL*
RSL# RSL? RSL=xxx
Rx Demod
Acquisition
Sweep Width RSW= 3 bytes Command or Query.
Rx
± acquisition sweep range of demodulator, in kHz, ranging from ± 1 to ±
100 kHz.
Example: RSW=009 (selects ± 9 kHz)
RSW=
RSW?
RSW*
RSW# RSW? RSW=xxx
(see description of
arguments)
Gigabit Learning
Mode SLM 2 bytes Command or Query.
s=Slot 2 Only
a=1 GBEI Learning Enabled.
a=0 GBEI Learning Disabled
SLM=
SLM#
SLM?
SLM* SLM?s SLM=a
Gigabit Auto
Autocrossover SCX 2 bytes Command or Query.
s=Slot 2 Only
a=1 GBEI Cable Auto Crossover Enabled.
a=0 GBEI Cable Auto Crossover Disabled
SCX=
SCX#
SCX?
SCX* SCX?s SCX=a
Serial Number N/A 9 bytes Query Only.
Used to query the unit 9-digit serial number. Unit returns its S/N in the form
xxxxxxxxx.
Example: SNO=176500143
SNO?
SNO*
SNO# SNO? SNO=xxxxxxxxx
Software
Revision N/A 5 bytes Query Only.
Unit returns the value of the internal software revision installed in the unit,
in the form: Boot:X.X.X Bulk1:Y.Y.Y Bulk2: Z.Z.Z
Example: SWR=Boot:1.0.3 Bulk1:1.0.1 Bulk2:1.0.0
SWR?
SWR*
SWR# SWR? SWR=Boot:X.X.X
Bulk1:Y.Y.Y Bulk2:Z.Z.Z
Real-time Clock
Time TIM= 6 bytes Command or Query.
A time in the form hhmmss, indicating the time from midnight, where:
hh = hours (00 to 23)
mm = minutes (00 to 59)
ss = seconds (00 to 59)
Example: TIM=231259 (23 hours:12 minutes:59 seconds)
TIM=
TIM?
TIM*
TIM# TIM? TIM=hhmmss
Temperature N/A 3 bytes Query Only.
Unit returns the value of the internal temperature, in the form of sxxx
(degrees C). Where s is the sign and and xxx is the number of degrees.
Example: TMP=+026
TMP?
TMP*
TMP# TMP? TMP=sxxx