Comtech EF Data CDM-710G - Manual (Page 127)

CDM-710G High-Speed Satellite Modem Revision 1
Front Panel Operation MN-CDM710G
6–51
If Firmware Info: Æ Bootrom is selected:
Bootrom: 07/17/06
CDM710_Boot 1.1.1
This screen provides information on the installed Bootrom firmware. The release date is provided
on the top line in DAY/MONTH/YEAR format; the bottom line identifies the installed Firmware
by its release name/number and its version number.
Note: The firmware information shown above is representative. Current status is obtained via the
Firmware Info: Æ Bootrom submenu.
Press ENTER or
CLEAR
to return to the previous menu.
If Firmware Info: Æ Image#1 or Æ Image#2 is selected:
Image#x: Bulk App Framer
FEC Mod Demod Interfaces
On the next page, Table 6-5 provides an overall summary of examples for each available
firmware info screen. As shown, the first column for either Image provides the available
selection; the second column provides an example of the information provided for that selection.
Note: The information in this table is representative; the firmware numbers/revision
letters/versions/release dates are subject to change.
(Firmware:) Firmware Images
Æ Select
Current Active Image: #2
Next Reboot Image: #1 #2
The top line shows the active image. To select the active software image, on the second line, select
the desired image using the
W X arrow keys, then press
ENTER
.
To make the selected image the active choice, power cycle the modem to reboot the new software.