Comtech EF Data CDM-710G - Manual (Page 242)

CDM-710G High-Speed Satellite Modem Revision 1
FAST Activation Procedure MN-CDM710G
C–2
C.2 Activation Procedure
C.2.1 Obtain Unit Serial Number
Obtain the modem serial number as follows:
a) From the front panel
SELECT:
(main) menu, select
UTILITY Æ FAST, then press
[ENTER].
b) The modem motherboard Serial Number is displayed on the bottom line, to the left:
FAST: Cnfg View
MainBoard S/N: 333333333
c) Record serial number: ________
C.2.2 View currently installed features
To view the currently installed features, proceed as follows:
a) From the
UTILITY Æ FAST menu, select
VIEW
, then press [ENTER].
b) Scroll through the modem Options using the ▲▼ arrow keys, and note which options are
‘Installed’ or ‘Not Installed’. Any that are ‘Not Installed’ may be
purchased as a FAST upgrade:
View Options: 01 ( )
IF Modulator Installed
C.2.3 Purchase FAST Access Code
Contact a Comtech EF Data sales representative to order features. You will be asked to provide
the modem Serial Number. Comtech EF Data Customer Support will verify the order and provide
an invoice, instructions, and a 20-character FAST access (configuration) code.
C.2.4 Enter FAST Access Code
Enter the FAST access code as follows:
a) Press [CLEAR] to return to the
UTILITY Æ FAST menu:
FAST: Cnfg View
MainBoard S/N: 333333333
b) Select
Cnfg
, then press [ENTER]:
FAST Configuration:
Edit Code Demo Mode
c) Select
Edit Code , then press [ENTER].