Comtech EF Data CDM-710G - Manual (Page 122)

CDM-710G High-Speed Satellite Modem Revision 1
Front Panel Operation MN-CDM710G
6–46
6.3.4 SELECT: INFO
Note: INFO screens provide read-only information on the current configuration of the modem
without risking inadvertent changes. The user may only view, but not edit, an Info screen.
INFO: Rem Tx Rx
Intfc1 Intfc2 (E)
Select Rem, Tx, Rx, Intfc1, or Intfc2 using the ◄ ► arrow keys, then press
ENTER
.
6.3.4.1 (SELECT:) INFO
Æ Rem
Remote M&C: 100BaseTx
IP Addr: 192.168.001.006
This display provides the status, as applicable, of the Remote Monitor & Control configuration.
6.3.4.2 (SELECT:) INFO Æ Tx
Tx: 0140.0000 17.379483
DVBS2 8P 3/4 -10.0 ON
Using the example shown, a typical transmit data info screen may be broken down as follows:
Value Description
Tx: 0140.0000 Tx Frequency in MHz
17.379483 Data rate in Mbps
DVBS2 Transmission mode
8P
(Modulation:)
QP=QPSK
8P=8-PSK
16A=16-APSK
32A=32-APSK
3/4 Code Rate
-10.0 Tx Power level in dBm
ON Tx Power: ON = On, OF = Off