Comtech EF Data CDM-710G - Manual (Page 149)

CDM-710G High-Speed Satellite Modem Revision 1
SNMP Interface MN-CDM710G
8–3
8.5 Common Private MIB
The CDM-710G SNMP agent also implements private MIBs. The CDM-710G Common MIB
holds all unit parameters not associated with Modulator, Demodulator, FEC, or Interface boards.
For detailed OID information please refer to the actual MIB file.
System Information Group
Provides hardware configuration information as well as serial and
model numbers
Remote Serial Group Provides parameters to the legacy serial interface parameters
Remote Ethernet Group Provides parameters of the Ethernet interface
Ethernet SNMP Group Provides parameters necessary to configure the SNMP interface
Interface TX Group Provides parameters that control the modulator options
Interface RX Group Provides parameters that control the demodulator options
Config Interface Group
Provides parameters for selection of the modems frequency
response
Monitor Group Provides access to Alarm/Fault/Events log
Save/Load Group Provides control of the unit configuration Store/Load capabilities
Utilities Group
Provides access to the units Real-Time clock, Internal Reference
Adjustment, Circuit ID, and Front Panel Brightness Control
Firmware Group
Provides Revision Numbers, and Release Dates for all firmware
within the unit
Modulator Private MIB
Provides access to all modulator specific functions such as
redundancy, GigE Interface, HSSI Interface, and G.703 Interface