Comtech EF Data CDM-710G - Manual (Page 129)

CDM-710G High-Speed Satellite Modem Revision 1
Front Panel Operation MN-CDM710G
6–53
6.3.6.6 (SELECT:) UTIL
Æ FAST
FAST: Cnfg View
MainBoard S/N: 333333333
Comtech EF Data’s FAST (Fully Accessible System Topology) system permits the purchase and
installation of options through special authorization codes, entered remotely or through the front
panel. FAST allows immediate implementation of different options through the user interface keypad.
All FAST options are available through the basic platform unit.
Select either Cnfg or View using the
W X arrow keys, then press
ENTER
.
(UTIL:) FAST
ÆCnfg (Configuration)
FAST Configuration
Edit Code Demo Mode
Select Edit Code or Demo Mode using the W X arrow keys, then press
ENTER
.
If FAST Configuration: Æ Edit Code is selected:
Edit 20 digit FAST Code:
00000000000000000000 ENT
Enter the code carefully on the bottom line by using the W X arrow keys to move to each character
position, then editing the character in that position by using the ST arrow keys. Once the 20-digit
FAST Code has been correctly edited into place, press
ENTER
. The CDM-710G will respond with
“Configured Successfully” if the new FAST option has been accepted:
If FAST Configuration: Æ Demo Mode is selected:
FAST Demo Mode: Off On
3888000 seconds remain
The Demo Mode enables all FAST options for a limited time. For newer units with the latest
firmware version, the Demo Mode lasts 45 days.
Select Off or On using the W X arrow keys, then press
ENTER
. The display indicates the time
remaining on the demo counter. The demo time may be paused either by turning demo mode off, or
by unplugging the unit. However, whenever the unit is turned back on, the demo counter will resume.
(UTIL:) FAST Æ View
View Options: 01 ()
IF Modulator Installed
Scroll through the available option numbers by using the ST arrow keys. The description of
each option and its installation status (Installed or Not Installed) appears on the lower line of
the display.