Comtech EF Data CDM-710G - Manual (Page 244)

CDM-710G High-Speed Satellite Modem Revision 1
FAST Activation Procedure MN-CDM710G
C–4
C.3 Using FAST Demo Mode
FAST Demo Mode may be enabled or disabled as follows:
a. Press [CLEAR] to return to the FAST menu:
FAST: Cnfg View
MainBoard S/N: 333333333
b. Select Cnfg, then press [ENTER]:
FAST Configuration:
Edit Code Demo Mode
c. Use the ◄ ► arrow keys to select Demo Mode, then press [ENTER].
FAST Demo Mode: Off On
604800 seconds remain
d. Use the ◄ ► arrow keys to select Off or On. When On, the second line will display the
under of seconds remaining available for the free Demo Mode.
When enabled, Demo Mode allows access to ALL CDM-710G FAST options for 604800
seconds (7 full days). Demo Mode may be turned on and off an unlimited number of time
until the 604800 seconds have expired. The seconds count is only decrement when the
mode is On.
When the Demo period expires the following menu is displayed:
FAST Demo Mode: Off On
Demo Period Expired
IMPORTANT
IF THE DEMO MODE STATE (OFF/ON) IS CHANGED, OR IF DEMO MODE IS
ENABLED AND THE TIMER EXPIRES, THE MODEM FIRMWARE WILL AUTO-
REBOOT AFTER 5 SECONDS.
NOTE THAT VALIDATION OF AUTHORIZED FAST OPTIONS OCCURS ON AUTO-
REBOOT; IF AN INVALID CONFIGURATION IS FOUND, THE MODEM
CONFIGURATION WILL RESET TO DEFAULT VALUES.