Comtech EF Data CDM-710G - Manual (Page 31)

CDM-710G High-Speed Satellite Modem Revision 1
Introduction MN-CDM710G
1–5
1.3 Features
1.3.1 Physical Description
The CDM-710G is constructed as a 1RU-high rack-mount chassis, which can be free-standing if
desired. Rack handles at the front facilitate removal from and placement into a rack.
The operator may configure and monitor the CDM-710G from the front panel, or through the
remote M&C port. Control and status is provided through the RS-232, RS-485 (2Wire or 4Wire)
port or 10/100 Base-T Ethernet port. The management Ethernet port supports SNMP, Telnet and
HTTP (Web browser) operation.
1.3.2 Major Assemblies
Assembly Description
PL/10002-1 Modulator, 70/140 MHz
PL/12113-1 Modulator, L-Band Card
PL/10003-1 Demodulator, 70/140 MHz
PL/11571-1 Demodulator, L-Band
PL/12148-1 Encoder Assembly, Tx DVB-S2 Long/Short Frame
PL/12169-1 Decoder Assembly, Rx DVB-S2 Long/Short Frame
PL/10008-2 CDI-10-1 G.703 Interface
PL/11582-1 CDI-60 HSSI Interface
PL/11509-3 CDI-70 10/100/1000 Base-T Ethernet (GigE) Interface (FW12738)