Basler Electric BE1-11g - Manual (Page 69)

9424200994 Rev N 57
Operational Settings
Phase undervoltage element operational settings are configured on the Undervoltage (27P) settings
screen (Figure 45) in BESTCOMSPlus. Setting ranges and defaults are summarized in Table 15.
Figure 45. Phase Undervoltage Settings Screen
Table 15. Operational Settings
Setting Range Increment Unit of Measure Default
Mode
Disabled,
One of Three,
Two of Three,
or Three of Three
n/a n/a Disabled
Pickup 0 or 1 to 300 0.1 volts 0
Inhibit Level 0 or 1 to 300 0.1 volts 0
Timing Mode Definite or Inverse n/a n/a Definite
Time Delay (Definite Timing) 50 to 600,000 varies milliseconds 50
Time Dial (Inverse Timing) 0 to 9.9 0.1 units 0
BE1-11g Phase Undervoltage (27P) Protection