Basler Electric BE1-11g - Manual (Page 185)

9424200994 Rev N 173
Figure 115. Breaker Control Element Logic Block
Table 67. Logic Inputs and Outputs
Name Logic Function Purpose
Trip Input Sets the state of the 101 element to Trip
Close Input Sets the state of the 101 element to Close
Informational Tag Input Sets an informational tag on the 101 element
Informational Untag Input Removes the informational tag from the 101 element
Blocking Tag Input Sets a blocking tag on the 101 element
Blocking Untag Input Removes the blocking tag from the 101 element
Trip Output True if the 101 element is in the Trip state
TSC Output True after the Trip output momentarily closes
Close Output True if the 101 element is in the Close state
CSC Output True after the Close output momentarily closes
Operational Settings
Breaker control element operational settings are configured on the Breaker Control Switch (101) settings
screen (Figure 116) in BESTCOMSPlus. Setting ranges and defaults are summarized in Table 68.
Figure 116. Breaker Control Switch Settings Screen
Table 68. Operational Settings
Setting Range Increment Unit of Measure Default
Mode Disabled or Enabled n/a n/a Disabled
BE1-11g Breaker Control Switch (101)