Basler Electric BE1-11g - Manual (Page 561)

9424200994 Rev N 549
Why don't the targets or trip LED work properly?
If a protective element is tripping at the desired level, but the targets aren't behaving as expected, use
BESTCOMSPlus to verify that the targets are enabled for the protective function. Refer to the
Fault
Reporting chapter for detailed information about targets.
Trip LED behavior depends on the pickup and trip expression of the protective function. When the
functions pickup expression is true and the trip expression is false, the Trip LED flashes. In other words, a
flashing LED means that a protection element is in a picked up state and is timing toward a trip. When
both the pickup and trip expression is true, the Trip LED lights steadily. The Trip LED also lights steadily
when neither expression is true but latched targets exist. When resetting a target, the Trip LED will not
turn off if the fault is still present. The truth table of Table 248 serves as an aid to interpreting Trip LED
indications.
Table 248. Trip LED Truth Table
Trip Pickup Targets Trip LED
No No No Off
No No Yes On
No Yes No Flash
No Yes Yes Flash
Yes No No On
Yes No Yes On
Yes Yes No On
Yes Yes Yes On
BE1-11g Troubleshooting