Basler Electric BE1-11g - Manual (Page 173)

9424200994 Rev N 161
A Block Tag alarm indicates when a block tag is in place. Refer to the Alarms chapter for information on
how to program alarms.
Logic Connections
Virtual control switch element logic connections are made on the BESTlogicPlus screen in
BESTCOMSPlus. The virtual control switch element logic block is illustrated in Figure 100. Logic inputs
and outputs are summarized in Table 61.
Figure 100. Virtual Control Switch Element Logic Block
Table 61. Logic Inputs and Outputs
Name Logic Function Purpose
Set Input Sets the state of the output to true
Reset Input Sets the state of the output to false
Pulse Input Momentarily changes state of the output
Informational Tag Input Sets an informational tag on the 43 element
Informational Untag Input Removes the informational tag from the 43 element
Blocking Tag Input Sets a blocking tag on the 43 element
Blocking Untag Input Removes the blocking tag from the 43 element
Output Output True when the 43 element is set
Operational Settings
Virtual control switch element operational settings are configured on the Virtual Control Switches (43)
settings screen (Figure 101) in BESTCOMSPlus. Setting ranges and defaults are summarized in Table
62.
BE1-11g Virtual Control Switches (43)