Altera POS-PHY Level 4 IP Core - Manual (Page 21)

December 2014 Altera Corporation POS-PHY Level 4 IP Core User Guide
3. Parameter Settings
You customize the POS-PHY Level 4 IP core by specifying parameters using the
parameter editor
in the Quartus ® II software.
c
This chapter describes the parameters and how they affect the behavior of the IP core.
Each section corresponds to a tab when you click Parameterize in the parameter
editor.
Basic Parameters
Figure 3–1 shows the basic parameters tab.
Device Family
Select the device family. Table 1–3 on page 1–2 shows the device families that the POS-
PHY Level 4 IP core supports.
Figure 3–1. Basic Parameters