Delta BLD-E1 brushless DC motor drive BLD-E1 Series - Manual (Page 90)

Chapter 4 Parameters| BLD-E1 Series
Revision May 2009, 00DE, V0.50 4-49
02-01
Multi-Function Input Command 3 (MI3)
Factory Setting: 1
02-02 Multi-Function Input Command 4 (MI4)
Factory Setting: 2
02-03
Multi-Function Input Command 5 (MI5)
Factory Setting: 3
02-04 Multi-Function Input Command 6 (MI6)
Factory Setting: 4
Settings VF VFPG FOCPM
0 ：no function
○ ○ ○
1 ：Multi-step command 1
○ ○ ○
2 ：Multi-step command 2
○ ○ ○
3 ：Multi-step command 3 ○ ○ ○
4 ：Multi-step command 4
○ ○ ○
5 ：Reset
○ ○ ○
6 ：Reserved
7 ：acceleration/deceleration speed inhibit
○ ○ ○
8 ：the 1st, 2nd acceleration/deceleration time
selection
○ ○ ○
9 ：the 3rd, 4th acceleration/deceleration time
selection
○ ○ ○
10: EF input (Pr.07-28) ○ ○ ○
11: Reserved
12: Stop output ○ ○ ○
13~14: Reserved
15 ：Running speed command from VR
○ ○ ○
16 ：Running speed command from ACI ○ ○ ○
17 ：Running speed command from AVI
○ ○ ○
18 ：Emergency Stop (Pr.07-28)
○ ○ ○
19~26 ：Reserved
27 ：ASR1/ASR2 Selection ○ ○ ○
28 ：Emergency stop (EF1) (Motor coasts to stop)
○ ○ ○
29~30 ：Reserved
31: High torque bias (by Pr.07-21) ○ ○ ○
32: Middle torque bias (by Pr.07-22) ○ ○ ○