Delta BLD-E1 brushless DC motor drive BLD-E1 Series - Manual (Page 103)

Chapter 4 ParametersAT |Troubleshooting}| BLD-E1 Series
4-62 Revision May 2009, 00DE, V0.50
Group 4 Multi-Step Speed Parameters
This parameter can be set during operation.
04-00
Zero Step Speed Frequency
04-01 1st Step Speed Frequency
04-02 2nd Step Speed Frequency
04-03 3rd Step Speed Frequency
04-04 4th Step Speed Frequency
04-05 5th Step Speed Frequency
04-06 6th Step Speed Frequency
04-07 7th Step Speed Frequency
04-08 8th Step Speed Frequency
04-09 9th Step Speed Frequency
04-10 10th Step Speed Frequency
04-11 11th Step Speed Frequency
04-12 12th Step Speed Frequency
04-13 13th Step Speed Frequency
04-14 14th Step Speed Frequency
04-15 15th Step Speed Frequency
Control
mode
VF VFPG FOCPM
Factory setting: 0
Settings 0 to 8000rpm
The Multi-Function Input Terminals (refer to Pr.02-01 to 02-04) are used to select one of the
brushless DC motor drive Multi-step speeds. The speeds (frequencies) are determined by
Pr.04-00 to Pr. 04-15 as shown above.