Delta BLD-E1 brushless DC motor drive BLD-E1 Series - Manual (Page 100)

Chapter 4 Parameters| BLD-E1 Series
Revision May 2009, 00DE, V0.50 4-59
Positive to rque
Reverse
03-00~0 2=7
Positive to rque limit
03-00~0 2=8
Neg ative to rque limit
03-00~0 2=9
Reg enerative
torque limit
03-00~0 2=10
Positive/negat ive torque limit
Neg ative Torq ue
Forw ard
03-00~0 2=10
Positive/negat ive torque limit
03-00~0 2=9
Reg enerative
torque limit
03-03 Analog Input Bias 1 (VR)
Control
mode
VF VFPG FOCPM
Factory setting: 0.0
Settings -100.0~100.0%
It is used to set the corresponding VR voltage of the external analog input 0.
03-04 Analog Input Bias 1 (ACI)
Control
mode
VF VFPG FOCPM
Factory setting: 0.0
Settings -100.0~100.0%
It is used to set the corresponding ACI voltage of the external analog input 0.
03-05 Analog Input Bias 1 (AVI)
Control
mode
VF VFPG FOCPM
Factory setting: 0.0
Settings -100.0~100.0%
It is used to set the corresponding AVI voltage of the external analog input 0.
The relation between external input voltage/current and setting frequency is equal to -
10~+10V (4-20mA) corresponds to 0~3000rpm.
03-06
Positive/negative Bias Mode (VR)
Control
mode
VF VFPG FOCPM
Factory setting: 0