First time setup process, First time setup process -6, Power unit on – TeeJet Swath XL User Manual

Page 26

Text mode
Original mode

Chapter 2 - Software Overview

2-6

First Time Setup Process

Swath XL

Software Version 3.00

First Time Setup Process

The first time you start up the Smartpad, you should also make sure that the current date and time are set correctly, see
“Set Date and Time” on page 2-26 for more details.

Power Unit On

Connect the Smartpad to the Smartpad interface Cable, see Figure 2-5, and apply 12 VDC power. It is not necessary
to have the lightbar or GPS receiver connected and running to change any of the settings. Power the unit up by press-
ing the On switch.

Figure 2-5: Connecting Smartpad to Interface Cable