TeeJet Swath XL - Manual (Page 136)

Chapter 4 - Waypoint Navigation 4-16
Lightbar Setup
Swath XL
Software Version 3.00
Use Lightbar
Allows the user to turn the lightbar on or off.
To change the Use Lightbar setting; highlight the Use Lightbar menu item and press . The Use Lightbar dialog
box appears. Select the desired setting using the arrow keys . Once the setting is selected, press to return
to the Lightbar setup menu, see Figure 4 -15.
Figure 4-15: Setup Lightbar Use Lightbar?
Setting Description
No The lightbar is not used while Nav 2 Point is running. The lightbar is not
required to run Nav 2 Point.
Yes The lightbar is used, and is required while the Nav 2 Point program is running.
Table 4-8: Use Lightbar Settings