TeeJet Swath XL - Manual (Page 109)

Swath XL
Software Version 3.00
3-61 Chapter 3 - Real-Time Guidance
Creating a Field Boundary
Creating a Field Boundary
Swath XL allows you to create a map of the field boundary while applying product around the perimeter of the field.
If you want to create a field boundary map, you must setup Swath XL to do so. For more information on field bound-
ary setup, review Chapter 2 Data Setup. A field boundary can be created in all three guidance options: Parallel, Head-
land, and Circle Pivot.
When Swath XL is setup to create a field boundary, a Map Boundary button is added to the button bar in the view
page, see Figure 3-81. To start mapping the field boundary, first align the edge of the vehicle swath with the edge of
the field boundary. In the following example, Swath XL is setup to create a field boundary off the right side of the
vehicle. Next highlight the Map Boundary button and press . Once the vehicle begins moving a line representing
the field boundary is drawn off the right edge of the swath, see Figure 3-82. Once the key is pressed, the lightbar
displays MAP BND as well as an arrow indicating which side of the vehicle is being used to create the boundary.
Figure 3-81: Preparing to Map Field Boundary
Figure 3-82: Creating a Field Boundary