Metalfab SEW Eurodrive MOVIMOT MM..C - Manual (Page 20)

20
Operating Instructions – MOVIMOT® MM03C - MM3XC
4
Option MLU..A / MLG..A / MLK11A
Mechanical Installation
4.4 Option MLU..A / MLG..A / MLK11A
Scope of delivery • MLU..A / MLG..A / MLK11A top [2]
• 2 screws [1]
• Cable entry screw [4]
• MLU..A / MLG..A / MLK11A lower section [5]
Installation 1. Remove a screw plug from the MOVIMOT
®
terminal box.
2. Attach lower section [E] to MOVIMOT
®
terminal box and fasten it with cable entry
screw [4].
3. Guide connection cable [3] through cable entry screw [4] into the MOVIMOT
®
termi-
nal box.
4. Place top [2] on bottom [5] and fasten it with 2 screws [1].
Important: Option may be assembled only in the position shown in the following
figure!
05625AXX
[1]
[2]
[3]
[4]
[5]
[1]