Metalfab SEW Eurodrive MOVIMOT MM..C User Manual
Movimot, Mm..c, Operating instructions
Table of contents
Document Outline
- 1 Important Notes
- 2 Safety Notes
- 3 Unit Design
- 4 Mechanical Installation
- 5 Electrical Installation of MOVIMOT® Standard Design
- 6 Electrical Installation with Integrated AS-Interface
- 6.1 Installation instructions
- 6.2 Connection options with integrated AS-Interface
- 6.3 Connection of MOVIMOT® MM../AVSK (connection option A)
- 6.4 Connection of MOVIMOT® MM../AZSK (connection option B)
- 6.5 Connection of MOVIMOT® MM../AND3/AZSK (connection option C)
- 6.6 Connection of URM option
- 6.7 Connection between MOVIMOT® and motor mounting close to the motor
- 7 Startup of Standard Design
- 7.1 Important startup instructions
- 7.2 Description of the controls
- 7.3 Description of the DIP switches S1
- 7.4 Description of the DIP switches S2
- 7.5 Selectable special functions MM..C-503-00
- Overview of selectable special functions
- Special function 1
- Special function 2
- Special function 3
- Special function 4
- Special function 5
- Special function 6
- Special function 7
- Special function 8
- Special function 9
- Special function 10
- Special function 11
- Special function 12
- Use of relay output with special functions 7, 9 and 12
- 7.6 Startup with binary control (control via terminals)
- 7.7 Startup with options MBG11A or MLG11A
- 7.8 Startup with MWA21A option (speed control module)
- 7.9 Startup with external AS-i binary slave MLK11A
- 7.10 Additional information for mounting close to the motor
- 8 Startup with Integrated AS-Interface
- 8.1 Important startup instructions
- 8.2 Description of the controls
- 8.3 Description of the DIP switches S3
- 8.4 Description of the DIP switches S4
- 8.5 Selectable special functions MM..C-503-30
- 8.6 Startup procedure
- 8.7 Advanced startup with MOVITOOLS
- 8.8 Additional information for mounting close to the motor
- 9 Startup with Communications Interface / Fieldbus
- 10 Diagnostics
- 11 Inspection and Maintenance
- 12 Technical Data of Standard Design
- 12.1 IEC design with connection voltages 380...500 VAC
- 12.2 UL design with connection voltages 380500 VAC
- 12.3 Technical data of options
- 12.4 Integrated RS-485 interface
- 12.5 Assignment of internal braking resistors
- 12.6 Assignment of external braking resistors
- 12.7 Resistance and assignment of the brake coil
- 13 Technical Data with Integrated AS-Interface