Metalfab SEW Eurodrive MOVIMOT MM..C - Manual (Page 135)

Operating Instructions – MOVIMOT® MM03C - MM3XC
135
10
Diagnostics of MOVIMOT® with integrated AS-Interface
Diagnostics
AS-i diagnostics
via diagnostic
interface MOVIMOT
®
drives with integrated AS-Interface contain a diagnostics interface for star-
tup and service. This allows for diagnostics, manual operation and parameter setting of
scaling factors using the SEW software MOVITOOLS (version 4.0 and higher).
The diagnostics interface is located on the top of the MOVIMOT
®
connection board (see
the following figure).
MWS21A option The diagnostic interface can be connected to a commercially available PC with a serial
interface (RS-232) using SEW’s diagnostic kit MWS21A (part number: 823 180X).
Scope of delivery of MWS21A:
• Interface adapter
• Cable with modular jack 4/4 (RJ11) plug connector
• RS-232 interface cable
• SOFTWARE-ROM 4 (MOVITOOLS software)
51943AXX
[1] Diagnostic interface X50
[1]
51872AXX
[1] Feed the cable through the cable entry into the MOVIMOT ® wiring space!
UWS21A
PC + MOVITOOLS
RS-232 Modular
Jack 4/4 (RJ11)
MOVIMOT ®
[1]