Metalfab SEW Eurodrive MOVIMOT MM..C - Manual (Page 108)

108
Operating Instructions – MOVIMOT® MM03C - MM3XC
8
Advanced startup with MOVITOOLS
Startup with Integrated AS-Interface
10.After clicking the "Update" button, the "Connected Inverters" window shows the
MOVIMOT
®
in use. If no device is shown, check the communications connection.
11.Activate the "MOVIMOT ASI" button in the "Device Type" window area.
12.Clicking the "Shell" button opens the user interface for diagnostics, manual operation
and parameter setting of scaling factors (Shell) as well as a status window.
13.The buttons "Monitor", "Manual mode" and "Scaling factors" in the top left window
area can be used to select the windows of the program. Additional information about
the "Monitor" window can be found in the section "Diagnostics."
06459AEN
06460AEN
0 0
I