General ambient conditions, A-5 and – Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual User Manual
Page 377
Publication 1760-UM002B-EN-P - March 2005
Specifications A-5
Table A.6 General Ambient Conditions
Climatic conditions
(damp heat constant to IEC 60068-2-78; cyclical to IEC 600618-2-30)
(cold to IEC 60068-2-1, heat to IEC 60068-2-2)
Ambient temperature
Installed horizontally/vertically
-25°C to +55°C, (-13°F to +131°F)
Condensation (processor unit;
inputs/outputs)
Prevent condensation with suitable
measures
Display legibility (-10 to 0°C with activated
backlight, uninterrupted duty)
-5°C to +50°C, (-23°F to +122°F)
Storage/transport temperature
-40°C to +70°C, (-40°F to +158°F)
Relative humidity (IEC 60068-2-30),
non-condensing
5 to 95%
Air pressure (operation)
795 to 1080 hPa
Ambient mechanical conditions
Pollution degree
Processor Unit; inputs/outputs: 2
Display/keypad: 3
Degree of protection (EN 50178, IEC 60529,
VBG4)
Processor Unit; inputs/outputs: IP20
Display/keypad: IP65, Type 3R, Type 12R
Display/keypad with protective cover: IP65,
Type 3R, Type 12R
Display/keypad with protective membrane:
IP65, NEMA Type 4X (type 3R rain-tight and
Type 12 dust-tight)
Oscillations (IEC 60068-2-6)
Constant amplitude 0.15 mm: 10 to 57 Hz
Constant acceleration 2g: 57 to 150 Hz
Shocks (IEC 60068-2-27) semi-sinusoidal 15
g/11 ms
18 shocks
Drop (IEC 60068-2-31)
50 mm drop height
Free fall, when packaged (IEC 60068-2-32)
1m