Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 329)

1 Publication 1760-UM002B-EN-P - March 2005
Chapter
7
Pico GFX-70 Settings
Settings can only be carried out on Pico GFX-70 models provided with
buttons and LCD display.
PicoSoft Pro can be used to set all models via the software.
Password Protection The Pico GFX-70 can be protected by a password against unauthorized access.
In this case the password consists of a value between 000001 and 999999. The
number combination 000000 is used to delete a password.
Password protection inhibits access to selected areas. The System menu is
always protected by an activated password.
The password can protect the following inputs and areas:
• Start or modification of the program
• Transfer of a circuit diagram to or from a memory module
(display/keypad variants).
• Change of the RUN or STOP mode.
• Calling and modification of function block parameters
• All settings of the real-time clock.
• Modifications of all system parameters.
• Communication with the individual device (looping to other devices
possible).
• Switching off the password delete function.