Activating the password -4, Activating the password – Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual User Manual

Page 332

background image

Publication 1760-UM002B-EN-P - March 2005

7-4 Pico GFX-70 Settings

Activating the Password

You can activate an existing password in three different ways:

• automatically when Pico GFX-70 is switched on again
• automatically after a protected circuit diagram is loaded
• automatically if a telegram has not been sent on the PC interface 30

minutes after unlocking the device (using PicoSoft Pro)

• via the password menu

1.

Press DEL and ALT to call up the System menu.

2.

Open the password menu via the menu option SECURITY…
Pico GFX-70 will only show this password menu if a password is
present.

3.

Select ACTIVATE PW and confirm with OK.

The password is now active. Pico GFX-70 will automatically return to
the Status display.

CHANGE PW

ACTIVATE

IMPORTANT

Make a note of the password before you activate it. If
the password is no longer known, Pico GFX-70 can
be unlocked (DELETE FUNCTION is not active),
however, the circuit diagram and data settings will be
lost.

ATTENTION

If the password is unknown or lost, and the delete
password function is deactivated: The unit can only
be reset to the factory setting by the manufacturer.
The program and all data are lost.