Rockwell Automation 1760-xxxx Pico GFX-70 Controllers User Manual - Manual (Page 143)

Publication 1760-UM002B-EN-P - March 2005
Wiring with Pico GFX-70 4-33
The operand is displayed.
• >I1 = Actual value of counter C 01
• >I2 = Constant 1095
• QV> = Marker double word MD56
3. Press the ALT button again.
The display shows the values.
Coil Functions
You can set the coil function to determine the switching behavior of relay
coils. The following coil functions are assigned to all coils:
AR01 ADD +
>I1 C 01QV>
>I2 1095
QV> MD 56
AR01 ADD +
>I1 20056
>I2 1095
QV> 21151
Table 4.17 Coil Function
Pico
GFX-70
display Coil function Example
[ Contactor function [Q01,[D02,[S04,[:01,[M07,..
Impulse relay function
Q03, M04, D08, S07, :01,..
S Set SQ08,SM02,SD03,SS04..
R Reset RQ04,RM05,RD07,RS03..
] Contactor function with
negated result ]Q06, ]M96..
Cycle pulse with rising
edge
M01..
Cycle pulse with falling
edge
M42..
IMPORTANT
The function block descriptions state which coil functions
can be used with the function block concerned.